Make your own Chainsaw Chains.
We get asked a lot about the Chains & how they are made or altered etc.
So here is a video to help show you what goes into Chainsaw Chains.
– What bits are what, what they do or are for & in depth guide on how they are made, set up and built 👏😎
“Guilty of Treeson” & his friend Jed show you what a Chain is all about.
Shadow of the Gardener doesn’t run big chains like these guys do.
We have no reason to run a 7 foot long chainsaw bar, no, really; we don’t!
We deploy smaller bars and chains, as we use Chainsaws only; for Ground to Head/Machine Operator Height work.
So no Rope Working, felling or Tree Surgery.
Generally a 14 or 16 Inch Bar on the rear Handled Saws, and a 10 Inch Bar on the Pole Saw bars.
- Max working height from the ground of 3-4 Meters.
- Max Horizontal Reach 3 Meters.
“Brush, Branch, Suckers and detritus clear out, perimeter of properties or their internal trail clearing, or working line clearance.
To allow work to go on between Trees or Shrubs, that have gone a little wild or been left to grow naturally for a few Decades.
Operating from their base, to the working height required for machinery or Arborist/Surgery & Ropework to follow at a later date.”
#LifeGoals #Ambition #Drive
SOTG Tools of the Trade.
We do get asked a lot about the Saws we use, especially the powered Saws.
Yes, the Chainsaws & the Pole Saw.
We deploy machinery from Husqvarna for most of our Chainsaws and Pole Saws.
We use Chains from Husqvarna & Oregon for our Chains.